20% off all new bookings until May 31st
,

3 Reasons why you need a Block Paving Driveway

Introduction:

The Driveway in every house is a residential road or path that connects the entrance of a home with the main street or road. It is the opening to the house of an individual. The driveways are designed to allow vehicles to enter and exit a residential space, and these driveways vary in length, width, and material to accommodate the different needs of homeowners. 

Different types of driveways

  • Concrete Driveways:  are constructed by pouring concrete and are known to be immensely durable with an extended lifespan. However, concrete driveways tend to have a high initial installation cost.
  • Asphalt Driveways: The driveways constructed using asphalt may be more cost-effective than concrete driveways, and they are also known to be more flexible, making them crack-resistant in extreme weather conditions. Asphalt driveways are quick to install but require regular maintenance.
  • Gravel Driveways: the gravel driveways have a straightforward installation procedure and can accommodate easy water drainage. They are a cheap install and less time-consuming. However, gravel driveways require periodic gravel replenishment and may need to be more stable than solid surfaces.
  • Brick and paver driveways: Paving Driveway services are primarily utilized to create aesthetically pleasing designs and give the exterior of a house a cleaner look.
  • Cobblestone driveway: the cobblestone driveways give a home an ancient school and medieval look, which can look unique and compelling depending upon the taste of different individuals. However, this option is relatively more costly than the ones mentioned above. 
  • Permeable Driveway: Permeable Driveway, as the name suggests, allows the water to flow freely, and it is excellent in areas where water tends to accumulate more often.
  • Tar and chip Driveways: They are more similar to gravel driveways in appearance and function but are relatively less expensive to install and maintain.
  • Green Driveway: It provides a simplistic, timeless, and environmentally friendly look. However, it requires frequent maintenance to keep the grass healthy, and they are better suited to heavy traffic than this type.

What are Block Paving driveways?

As the name of the driveways indicates, these are also a kind of driveways construed using several blocks or bricks. The bricks are placed close together in a specific pattern so that they jointly make a road or a driveway that extends from the entrance of a house to the main street.

Different paving driveway services are available, and you must select one of the competent paving services as this job requires immense skill and technique.

The blocks used in the Driveway can be made of multiple materials such as concrete, cement, clay, or even natural stone. The pricing of the Driveway at the time of Paving Driveway installation can vary depending upon the material you chose for the blocks. Natural stone provides the best look in Paving stone services but is costly at the same time.

The block paving a driveway is more complex than just pouring cement and laying it out. The work of cement and concrete is different from that of Paving services.  Let’s look at the steps involved in block Paving Driveway installation.

Block Paving Driveway Installation

Installing a block paving driveway involves several steps to ensure a stable, durable, and aesthetically pleasing surface. Here is a general outline of the stages involved in the installation process:

Step 1 – Planning And Design

Before starting any project, it is essential to conduct effective planning and stick to that plan. Make realistic goals and keep a check and balance on the program’s progress. Collaborate with your Paving stone services, create a design that works with the house’s aesthetics, and formulate a plan to initiate the installation of the Driveway.

Step 2 – Site Preparation

Clear out where the Driveway will be put down by removing vegetation or debris. Excavate the ground to the required depth. 

Step 3 – Sub-base Installation

The sub-base installation means adding a compact layer of aggregate to level the land and provide a stale and solid foundation.

Step 4 – Bedding Layer

Add a layer of sharp sand or a sand-cement mix over the compacted sub-base. This provides a smooth and level surface for laying the blocks.

Step 5 – Block Installation

Lay down the blocks by starting from a specific end and working your way down the designated path. 

Step 6 – Cleaning & Sealing

The final step is to clean and clear out the remaining residue and apply a sealant to the block paving to enhance the color, protect against staining, and make maintenance easier.

3 Reasons for Using Block Paving

There are countless advantages of using block paving, but there are three that stand out the most:

Flexibility in designs

As you all know, the block paving driveway consists of a driveway constructed using different blocks. It differs from the traditional way of pouring cement or concrete into a shape. Several blocks make up the entire Driveway. This gives a house owner countless ways to design and customize the Driveway.

One can make use of different colored blocks and make a very unique and colorful driveway. Additionally, the autonomy in designing allows you to create other elements in the Driveway.

Economical to maintain

As you know, the pavers comprise several blocks that make up the entire Driveway. The effects of weather or damage due to negligence can be quickly resolved as, unlike in the case of concrete or cement that needs to be replaced entirely, the damaged blocks can be replaced with new ones. Such factors mitigate the cost of maintenance.

Increase in property valuation.

Using pavers in the driveway Driveway is a value addition to your property that will aid you in attaining a better price when you consider selling it. Homeowners will see it as something unique and will be more than willing to pay a higher price than you demand. Many individuals resort to using concrete and cement for Driveways, and you will stand out with your Driveway driveway pavers that will attract more eyeballs.

Conclusion

In summary, block paving provides an excellent balance of longevity, visual variety, and low maintenance. A driveway made of block pavers becomes a wise investment for homeowners looking to improve their homes’ curb appeal and value.

Block paving is a dependable and aesthetically pleasing option for individuals wishing to leave a lasting impression on their driveways since it can be customized to particular tastes, endure the test of time, and require less maintenance.

Share on facebook
Facebook
Share on pinterest
Pinterest
Share on twitter
Twitter
Share on linkedin
LinkedIn

Leave a Reply

Your email address will not be published. Required fields are marked *